Global Chemicals

ARDA ROOFGUARD WHITE is a special, synthetic resin-based waterproof coating known for its flexibility and thixotropic nature, making it suitable for both vertical and horizontal surfaces

Being one of the renowned firms in the industry we are involved in providing a high quality Products

ARDA Wall Guard is a single-component, flexible, thixotropic, waterproof and decorative coating based on a special acrylic resin. It's designed for both interior and exterior surfaces, offering excellent waterproofing and protective properties

Acrylic polymer modified elastomeric waterproofing membrane coating for concrete and masonry surfaces

Uses
Brushbond provides a seamless, waterproof coating suitable for use in water tanks, reservoirs, swimming pools, roofs, toilets and wet areas to ensure water tightness.

Brushbond effectively protects against concrete decay providing a long lasting barrier to waterborne corrosive salts and atmospheric gases.Brushbond is designed to re-face and even out variations in concrete and masonry surfaces. Brushbond effectively seals concrete masonry walls and bridges the shrinkage cracks which are static.

Brushbond provides a tough and durable coating which cannot be easily damaged or worn away

Uses
Brushcrete polymer in conjunction with cement provides a seamless waterproof coating to concrete and masonry surfaces. It can be used as a waterproof or protective coating.

Advantages
 Can be applied in uniform thickness to horizontal and vertical surfaces.
 Develops excellent bond to most building materials.
 Improves mechanical & physical properties of the coating system when used in conjunction with cement.
 Reduces or prevents salt penetration into concrete.
 Resistance to ultraviolet light or by chemicals ranging from mild acids to strong alkalies.
 Is highly impermeable in continuous wet condition.
 Is non-flammable and does not give off toxic gases, when exposed to fire.

Acrylic Polymer for concrete & masonry

Uses

Brushcrete polymer in conjunction with cement provides a seamless waterproof coating to concrete and masonry surfaces. It can be used as a waterproof or protective coating.

Advantages

• Can be applied in uniform thickness to horizontal and vertical surfaces.
• Develops excellent bond to most building materials.
• Improves mechanical & physical properties of the coating system when used in conjunction with cement.
• Reduces or prevents salt penetration into concrete.
• Resistance to ultraviolet light or by chemicals ranging from mild acids to strong alkalies.
• Is highly impermeable in continuous wet condition.
• Is non-flammable and does not give off toxic gases, when exposed to fire.

Non toxic

Dr. Fixit Roofseal Classic is single component, insulating elastomeric waterproof coating for roofs that offer a seal against water and heat. Dr. Fixit Roofseal Classicis based on Acrylate PU hybrid emulsion technology reinforced with nano fibres. It combines the benefits of waterproofing as well as heat reduction in a single product.
Standard Compliance / Specification
Meet the ASTM D6083 - Type II standard specification Areas of Application Over existing building Flat/ Slope roof surface like;
Brick-Bat Coba finish surface 
Cement mortar screed 
China mosaic tile roofs.

ARDA Roof Guard in grey is a waterproofing coating designed for roofs and exterior walls. It is a single-component, cold-applied, and highly elastic product, formulated with acrylic resin, ceramic hollow microspheres, pigments, and additives

Product DescriptionDescription:

CHRYSO THERMOSHIELD is pure acrylic polymer based elastomeric high build solar heat reflecting eco- friendly paint for roof and exterior walls. The cooling effect is designed with high quality titanium di oxide pigment which reflects more than 80% of solar radiation and specialty micronized ceramic hollow sphere which reduces heat transmission inside the room. The cured CHRYSO THERMOSHIELD also acts as high performance waterproof membrane. When it is applied on exterior side walls and roof it reduces energy cost approximately 30%.

Domains of Application CHRYSO THERMOSHIELD is used for heat insulation and waterproofing of old as well as new flat / slope concrete /metal roof, terrace and walls of residential, commercial and industrial buildings. Method of Application Surface Preparation Prior to application of CHRYSO THERMOSHIELD, all surfaces must be prepared properly to avoid failure. The surface shall be cleaned to remove all dust, foreign materials/loose particles or any deposits of contaminants, which could affect the bond between the original substrate and the CHRYSO THERMOSHIELD system. This can be done by scarifying, grinding, water blasting, sand blasting, acid washing or any other approved method. Rectify depression / honey-comb (if any) in the surface, use CHRYSO ARMOURCRETE mortar ( 1part CHRYSO ARMOURCRETE, 2part cement, 4 part medium washed sand) and leave it for at least 24 hours before application of CHRYSO THERMOSHIELD. Treatment of Cracks If there is any crack up to 2 mm, clean those cracks with vacuum cleaner, to open cracks, pour CHRYSO PROOF ACRYLIC PRIMER followed by a coat of CHRYSO PROOF ACRYLIC along the crack line and leave it to dry for overnight. Application of Primer Though CHRYSO THERMOSHIELD adheres strongly with most of building materials like cement concrete, mortar, bricks, woods, metal etc, use of CHRYSO PROOF ACRYLIC PRIMER provide better performance of final coating system. Stir well the Primer and apply it with soft nylon brush or roller over the dry surface. Generally, one coat is sufficient. If the surface is too porous apply two coats of primer. Time gap between two coats should be 2-3 hours.

Product DescriptionDescription:

Water Based Penetrating Primer

Domains of Application

Used as an high performance primer for water based anticarbonation and waterproof polymer coating for bridge deck, under pass, building walls, roofs, etc.  Can be used as sealer coat for industrial floors, interior/exterior walls. When used as primer it enhances performance of high end interior/exterior decorative/protective coating.

Coverage: (Theoretical) 4-6 m2 /kg/coat (depending on surface finish)

Product DescriptionDriven by a vision to achieve significant growth in the industry, we are engaged in providing a wide range of Acrylic Coating.

Characteristics:

• Easy to apply by brush or in thin trowel applications
• No additional water required to make the slurry
• Pre-batched components
• Hand or spray applied
• Easy and fast mixing
• Very good adhesion with sound and prepared substrates
• Protects concrete against water penetration, chloride, and carbonation
• Noncorrosive to steel or iron
• Approved for potable water contact
• Flexible enough to bridge hairline crack