Waterproofing Coating

Product Details:

Product DescriptionDr. Fixit Pidifin 2K is a two-component waterproofing coating for the sunken portion and splash zone in a leaking bathroom.

Dr. Fixit Pidifin 2K is an acrylic cementitious, polymer modified elastomeric, waterproofing & protective coating composed of best quality Portland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and masonry substrates.

Areas of Application:

• Dr. Fixit Pidifin 2K must be applied to new or old concrete substrates that are structurally sound.
• Excellent as a waterproof coating for bathrooms, kitchen sinks, balconies, etc.
• Ideal as a coating for waterproofing of chhajjas, canopies, etc.
• As the waterproof coating on internal sides of domestic water tanks.
• Good for waterproofing of sloped roofs.
• As a waterproof coating for terraces of areas up to 100-150 m 2.

Features & Benefits:

• Elastomeric – elastomeric flexible coating that accommodates cracks up to 2 mm with an elasticity of 40-50%
• Low water permeability – excellent resistance to ingress of water
• Adhesion – excellent adhesion to concrete and masonry surfaces
• Eco-friendly – Non-toxic with low VOC content
• CFTRI certified – as a “potable water safe” coating for waterproofing for water tanks

Precautions & Limitations:

• Do not part mix. Mix the entire quantity of both the components at one go.
• Do not dilute.
• Always add powder to liquid to avoid lump formation.
• Do not cure by flooding with water.
• Cure the membrane with moist hessian cloths
• Do not conduct any ponding test before it is completely cured for 7 days
• Always protect the membrane with screed in areas exposed to foot and other traffic.

Shelf Life & Storage:

• Store in the shed, protecting from direct sunlight and away from extreme temperature.
• In extremely hot temperature conditions, store in a temperature-controlled environment i.e.less than 30 Degree C.

Health & Safety Precautions:

• Dr. Fixit Pidifin 2K is alkaline and should not come into contact with skin or eyes.
• Avoid inhalation of dust during mixing.
• Gloves, goggles and dust masks should be worn, during mixing and handling the product.
• Any contact to eyes should be washed immediately with clean water and seek medical advice

Additional Information:

• Delivery Time: same day
• Packaging Details: 15 kg

Product Details:

Dr. Fixit Flexi PU 270(I) is a liquid-applied, highly permanent elastic, cold applied and cold curing, one component Polyurethane membrane used for long-lasting waterproofing.

Additional Information:

• Delivery Time: 1-2 Days
• Packaging Details: 25 Ltr. Pack

Product Details:

Acrylic polymer modified protective and decorative coating for concrete and masonry

Uses
To protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen and water. The product is also suitable to protect other cementitious substrates and masonry for new and existing structures. Typical applications include :

• Re-facing and reprofiling concrete & masonry surfaces 
• Flexible coating to bridge shrinkage cracks 
• Waterproof coating for water tanks and reservoirs
• Robust coating which can withstand pedestrian traffic 
• Backing to marble and granite, preventing water ingress and alleviate staining.

Advantages

• Excellent barrier to carbon dioxide, chloride ions and water 
• Allows water vapour to escape from the structure
• Water proof - suitable for water retaining structures
• High resistance to the effects of long-term weathering, durable in all climatic conditions including UV attack
• Minimum surface preparation needed and low labour costs
• Flexible, with thermal expansion similar to concrete
• Covers honeycombed and pitted poured concrete effectively
• Good abrasion resistance

Additional Information:

• Production Capacity: 5000
• Delivery Time: same day
• Packaging Details: Industrial kit : 27 kg pack consisting of: Powder : 20 kg bag Liquid : 7 kg pail

Product Details:

Storage Conditions /Shelf Life:

• 12 months from date of production if stored properly in original, unopened and undamaged sealed packaging in dry and cool conditions. Liquid component must be protected from frost.

Additional Information:

• Production Capacity: 10000 kg
• Delivery Time: same day
• Packaging Details: Packaging Details: 20 Kgs Powder and 5 Kgs Liquid should be mixed properly and apply in two coats which gives 100 Sqft per pack of 25 Kgs

Product Details:

Sikalastic® 560 is a cold applied , one component waterborne liquid applied waterproofing membrane based on modified polyurethane

Uses :-

1- For roof waterproofing solutions in both new construction
     and refurbishment projects
2-  For roofs with many details and complex geometry when
     accessibility is limited .
3-  For cost efficient life cycle extension of failing roofs .
4-  For reflective coating to enhance energy efficiency by
     reducing cooling costs

Characteristics / Advantages

UV resistant and resistant to yellowing and weathering .
Highly elastic and crack bridging.
Non-toxic and VOC compliant water based coating.
One component - ready to use
Excellent adhesion on porous and non-porous substrates
Seamless waterproofing membrane
Water vapour permeable
12 months shelf life

Additional Information:

• Production Capacity: 500
• Delivery Time: 3-4 day
• Packaging Details: 10 kg Plastic Pails

Product Details:

Product Description- Dr Fixit 301 Pidicrete URP is based on modified styrene-butadiene latex supplied as a ready to use bonding agent in liquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs & waterproofing of toilets & bathrooms, small terraces etc. as it bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance.

Additional Information:

• Production Capacity: 1000 kg
• Delivery Time: same day
• Packaging Details: 20 and 50 kg

Product Details:

Chryso Armourcrete : Acrylic based Polymer Modified Cementitious Composite coating system

Application:Chryso Armourcrete polymer modified mortar is ideal foruse in new areas, as well as in renovation work for surfacing,protecting, waterproofing, bonding old concrete to newconcrete, gunniting, sprayed mortar, repairs to concrete, brickwork, masonry, and also as filling material for joints, grooves,etc. Chryso Armourcrete polymer is recommended forwaterproofing of basements, toilets, roof gardens, terraces,swimming pools and water tanks and general concrete repairs.

Additional Information:

• Production Capacity: 1000 kg
• Delivery Time: same day
• Packaging Details: 20kg,50kg and 200kg HDPE drum.

Product Details:

Friazinc R EPOXY BASED ZINC RICH PROTECTIVE COATING AND PRIMER FOR STEEL

DESCRIPTION Friazinc R is two component, low solvent, zinc rich epoxy resin based protective coating and anti-corrosive primer for steel.
USES
▪ Used as protective coating or as primer Specially suitable for steel objects which are subjected to mechanical wear, e.g, weirs, interior of pressure pipe line, gates, steel liner of penstocks and tanks, etc

Additional Information:

• Production Capacity: 100 kg
• Packaging Details: 2 kg X 2 Nos

Product Details:

Brushbond RFX:

High performance elastomeric cementitious waterproof coating

Uses
Brushbond RFX is an high performance elastomeric cementi- tious coating used for waterproofi ng and to protect atmospheri- cally exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen & water. Brushbond RFX is suitable for all types of structures including those in coastal environments. The product can be used on concrete, brick and blockwork sub- strates and is equally suitable for new and existing structures. The product is designed to reface and even out variations in concrete and masonry surfaces and bridge shrinkage cracks. It provides a seamless, fl exible waterproof coating suitable for water tanks, reservoirs, drainage culverts basements, roofs, toilets & wet areas. The product provides a tough durable water resistant coating which can withstand light pedestrian traffi c and also has excellent weather resistance for exterior applications.

Advantages
1- Excellent barrier to carbon dioxide chloride and sulphateions
2- Allows water vapour to escape from the structure.
3- Waterproof-suitable for water retaining structures.
4- High resistance to the effect of long-term weathering,
    durable in all climate conditions including UV attack.
5- Non toxic - ideal for potable water tanks.
6- Flexible, with thermal expansion similar to concrete

Additional Information:

• Production Capacity: 5000
• Delivery Time: same day
• Packaging Details: Powder component : 15kg & 5kg packs Liquid polymer component : 5.088 kg & 1.71 kg containers

Product Details:

ika® Raintite I is a multi functional polymer emulsion for enhancing the properties of mortar/ concrete/ grout/ cement slurry providing good adhesion, water resistance and improvement of several other properties.

Additional Information:

• Production Capacity: 2000 kg
• Delivery Time: same day
• Packaging Details: 20 kg , 50 kg , 200 kg

Product Details:

Krystol T1® is a surface-applied crystalline waterproofing treatment for concrete structures that is used to protect against the ingress of water. It is a dry powder, which when mixed with water becomes a coating that is applied to the inner orouter side of a concrete structure. Krystol T1® may also be applied as a dry-shake to freshly poured concrete.
Krystol T1® contains Kryton’s unique and proven Krystol® technology which reacts with un-hydrated cement particles to grow millions of needle-like crystals deep into the concrete mass. Over a period of weeks and months, these crystals grow, filling the naturally occurring pores and voids in concrete, and permanently blocking the pathways for water and waterborne contaminants. Later, if cracks form due to settling or shrinkage, incoming water triggers the crystallization process and additional crystals begin to grow, filling cracks and ensuring that the structure’s waterproofing barrier is maintained and protected. The concrete itself becomes the waterproof layer removing the need for any surface treatment.

Additional Information:

• Delivery Time: Same Day
• Packaging Details: 25 Kgs. Bucket

Product Details:

Product DescriptionCHRYSO BITUTHANE BI is a general purpose two component Epoxy impregnator/primer. It is a solvented primer for superior penetration. It is carefully formulated using selective Epoxy polymers to give an impregnating primer for Epoxy and PU toppings/coatings. It’s main function is to enhance the bonding between the concrete and Epoxy / PU top coatings .It acts as a general impregnating /penetrating protective primer that protects concrete masonry & metal structures from corrosive soil salts and ingress of subsurface water.

Additional Information:

• Production Capacity: 200 kg
• Delivery Time: same day
• Packaging Details: 20 Kg