Global Chemicals

Sika®-101h is a cement based powder crystalline waterproofing system for concrete and mortar to prevent water infiltration or seepage of water in the area of low pressure of concrete structure or any cementitious substrate. Sika®-101h forms slurry consistency when mixed with water.

Dr. Fixit Polyplus Cp Admix is an integral crystalline waterproofing admixture added to the concrete mix at the time of batching. It consists of Portland cement, very fine treated silica sand and various active chemicals. These active chemicals react with the moisture in fresh concrete with the by-products of cement hydration to cause a catalytic reaction, which generates a non-soluble crystalline formation throughout the pores and capillary
tracts of the concrete. Thus the concrete becomes permanently sealed against the penetration of water or liquids from any direction. The concrete is also protected from deterioration due to harsh environmental conditions. The admixture also has the ability to self-seal minor cracks & withstand high level hydrostatic water pressure.
Method of Application:
- Dr. Fixit POLYPLUS CP Admix is a dry powder dosed at 0.8% to 1.2% by weight of the cement and added directly to the mortar during mixing. Maximum 4 kg per cubic meter is allowed.
- For smaller mixes, add prescribed quantity of Dr. Fixit POLYPLUS CP Admix to the sand & coarse aggregates. Mix the components thoroughly for 2-3 minutes before adding the cement & water. The total concrete mass should be blended using standard practices.

Krystol T2 is a surface applied system. It can be applied with brush or can be sprayed on new or existing concrete. Effective on the positive side as a single coat and on the negative side as a double coating system along with Krystol T1, it seeps into the concrete and works from within.

Krystal Internal Membrane™ (KIM) is a hydrophillic crystalline waterproofingadmixture in dry powdered form, effective in creating waterproof concrete.
Krystol Internal MembraneTM (KIM®) is a hydrophillic crystalline waterproofing admixture in dry powdered form, effective in creating waterproofconcrete. KIM is the STANDARD used for qualifying Permeability Reducing Admixture - Hydrostatic Conditions as specified by ‘ACI 212' (Highest Grade of Permeability Reducing Admixture). KIM is used in place of externally applied surface membranes to protect against moisture transmission, chemical attack and corrosion of reinforcing steel.