Sbr Latex
Authorized Wholesale Dealer of a wide range of products which include ultratech seal and dry waterproofing and chryso struco latex.Ultratech Seal And Dry Waterproofing
Product Details:
| Minimum Order Quantity | 20 Kg |
| Form of Chemical | Liquid |
| Brand | Ultratech |
| Usage/Application | Waterproofing bathroom, sunken areas, bonding coat for concrete work |
| Packaging Size | 20kg |
| Category | Waterproofing Coating |
| Coverage | 20 SQFT IN 2 COAT |
| Type | SBR LATEX |
| Color | White Crystal |
| Material | SBR LATEX |
| Ph Value | 8 - 10 |
| Shelf Life | 24 MONTHS |
| Storage Condition | DRY CONDITION |
| Pot Life | 2 HOUR |
| Thickness | 1 MM |
| Packaging Type | Packet |
| Surface Of Application | Waterproofing bathroom, sunken areas, bonding coat for concrete work |
| Elongation at Break | 80 % |
| Product Name | Ultratech Seal And Dry Waterproofing |
| Country of Origin | Made in India |
Ultratech Seal And Dry Waterproofing
Waterproofing bathroom, sunken areas, bonding coat for concrete work
- UltraTech 50 Kg Seal Dry is a Styrene Butadine Latex co-polymer that can be used to waterproof, bond and modify mortar or concrete.
- UltraTech Seal & Dry SBR is a multipurpose bonding agent that can be used as an adhesive and sealant. UltraTech Seal & Dry SBR works well as an adhesive because it has a consistency similar to latex paint. It can be applied to wet surfaces and will dry within 15 minutes. UltraTech Seal & Dry can also be used as a sealant for cracks in concrete foundations, brick walls, or patio slabs.
- Seal & Dry should not be applied in temperatures below 60 degrees or above 90 degrees Fahrenheit. It is important to avoid freezing or exposing the product to heat because it contains latex content which may cause separation if the product is frozen or overheated. It is recommended that you use the product within two years of purchase and keep the packaging airtight when not in use to prevent separation of the latex content from the polymer. UltraTech Seal & Dry should always be tested on an inconspicuous area of your project to ensure compatibility with your material and overall project goals before applying it to a larger surface area.
Callback
Additional Information:
- Production Capacity: 2000 KG
- Delivery Time: SAME DAY
- Packaging Details: 20 KG AND 50 KG
Chryso Struco Latex
Product Details:
| Form of Chemical | Liquid |
| Brand | Weber (by Saint Gobain) |
| Packaging Size | 20 Kgs |
| Usage/Application | Waterproofing |
| Category | Waterproofing Coating |
| Color | Milky White |
| Packaging Type | Bucket |
| Physical Form | Liquid |
| Shelf Life | 12 Months |
Chryso Struco Latex SBR Latex Based All Purpose Waterproofing And Bonding Compound
Description:-
Chryso Struco Latex is a single component, polymeric synthetic rubber emulsion (SBR), which can be added to any cementitious formulation, to achieve bonding and waterproofing properties.
Domains of Application:-
In rendering / plastering work on all brick walls in Residential and Industrial Structures.
In silos, basement structures and for damp-proof course in residential buildings.
For repair / maintenance work of existing damp wall, saltpetre action in brick work.
As an integral damp proofing /waterproofing compound in concrete for roof, slab etc.
In marine structures and sea facing buildings.
Method of Application:-
Struco Latex is versatile product which can be mixed with cement slurry, mortar, concrete or grout, as per recommended dosage in each case. Masons enjoy using it as an additive to repair mortars and renderings, to arrest rebound loss, due to its thixotropic properties. An excellent remedy against rising dampness, saltpetre action and damp walls, when used as a plaster additive.
Method of Application In Cement Slurry:-
Dilute 100 gms. Struco Latex with 400 gms. Of clean water. Pour 1 kg. Cement to this milky solution and keep mixing till it forms a uniform slurry. This slurry will cover about 2 m2 and it will form an excellent bond coat, on which an overcoat can be applied, while the bond coat is tacky.
As Direct Bond Coat:-
The surface should be thoroughly cleaned and roughened for mechanical key. Mix 2 parts of cement with 1 part of diluted Struco Latex (Latex: Water =1:1 to 1:4,) and Apply evenly over the substrate, using a brush. The new top coat should be applied when this primer coat is still tacky. As a prime coat for bonding, consumption of Struco Latex will be about 200 to 300 gm/ m2 depending on the porosity of the substrate.
As Mortar/Render:-
Dilute Struco Latex with water. Add this diluted solution of STRUCO LATEX to cement – sand mixture, the mixture will become creamy and user friendly. Masons .Enjoy using this, as the speed of plastering also increase. Dilution of Struco Latex with water can be done in the ratio of 1:2 to 1:10 depending on the severeness of the water seepage.
As Putty For Joints:-
Mix Struco Latex with water in the ratio 1:1 to form liquid A. Mix one part cement to three parts of sand to form powder B. Mix A : B in the ratio 1 : 8 to form a mortar of putty consistency, for application in joints. Apply putty in SSD condition after proper nosing of joints; cure for 28 days
In Cementitious Grouts:-
Struco Latex can be added to freshly prepared grout and used either for Pocket grouting, baseplate grouting or for injection purposes.
For Injection Grouting:-
mix 2 to 3 kg. Latex per bag of cement, along with other grouting admixtures. FOR
As Damp Proof Course (DPC):-
Depending on ground water label, location and seasonal moisture contents of the substrate, STRUCO LATEX can be diluted with gauging water accordingly ; either in the ration 1:4 or 1:6 and used to hydrate the flooring/DPC material. In marshy areas, a slurry coat (1: 4: 10 = Latex: Water: Cement) is recommended.
In Concrete:-
In any nominal mix, can be added with the gauging water in conjunction with other admixtures, while producing concrete
Callback
