Offering you a complete choice of products which include technonicol app membrane 3mm, app water proofing job work, dr fixit torchshield ap 3160, self adhesive sbs- modified bitumen membrane with aluminium foil on top, 1.5 mm and sika app membrane 103.
Description: APP-modified bitumen membrane ULTRAPLAST B is designed for installation as the bottom layer in double-layer roofing system on buildings and constructions, for waterproofing of foundations and engineering structures. Can be used as an underlay for bitumen shingles on pitched roofs. Used for new construction or repair. The material withstands temperature fluctuations and high mechanical loads providing a long-term, reliable and effective waterproofing. APP polymer provides additional flow resistance that makes it possible to use the material in a very hot climate. On the bottom side, the material is covered by a polymer film with special graphic elements, melting of which indicates the proper material heating. On the top side, the material is covered by a polymer film.
Self-adhesive glass fiber reinforced SBS-modified bitumen membrane with aluminium foil on top
Product description ULTRAFLEX SA ALU is produced on a base of a high-quality polymer-bitumen binder. On the top side, the membrane is covered with the combination of PET film and aluminium foil. Self-adhesive material allows high speed of application and does not require any additional equipment and skills. The membrane is used as an underlay on pitched roofs and as a vapor barrier. Could also be used on top of metal corrugated sheeting with adhering to the whole surface of corrugations (not only on the upper edge of the profiled sheet). Performance of works The application surface must be cleaned of dust, debris, grease, leaves, oil and should not have gaps and cracks or other irregularities to ensure proper adhesion of the membrane. Remove anti-adhesion film, smooth the membrane at the prepared surface and press overlaps with a heavy roller. Transverse and longitudinal overlaps are to be 150 mm as per the international standards. Installation of self-adhesive materials should be performed within the favourable climatic conditions i.e. dry weather and temperatures above +10°C. Aluminium foil on the top surface of the material should not be damaged during the whole service life of the membrane as it may lead to degradation of performance and the loss of the manufacturer’s warranty. Storage Rolls of the material should be stored indoors in a dry place in their original packaging and taken to the construction site ready to use. Keep the rolls upright and do not stack pallets. Storage of rolls in a horizontal position is prohibited. Falls or other mechanical impacts should be avoided during transportation and storage.
This type of membrane is manufactured by modifying premium grade asphalts with atactic poly propylene and specially reinforced with non- woven polyester. This type of membrane show excellent strength, elasticity and durability. Uses It is used as waterproofing /dam proofing membrane for protection of various substrates in wide range of applications.
Medium to large roof slabs ( domestic, commercial and industrial) Basements and raft slabs Underground car parks etc. Bridges & Underpass